Sunday, January 17, 2010

Yuba boxes technical

The boxes for the Yuba aren't complicated in construction, but there are a few things that might interest other enterprising V2 owners.

First, I made a few modifications to the rack to simplify the project. The V2 is unique in the way its rack bolts to the main frame where the front two of the four vertical stays bolt both to the top rack and the frame. On the V1 the stays are all welded to the top rack and bolt to the frame, and on the V3 everything is welded together. The bolt-on stays on the V2 stick out past the plane formed by the edge of the top rack and the welded rear stays, so if you strap a flat thing to the vertical rack (like a sheet of plywood, for instance) the front stays will mar and gouge the surface. I did a little more work with files to get them back to a position safe for cargo. I neglected to take before photos, but the notes on the Flickr pages should be clear enough to anyone who's spent time with a V2. I painted the filed surfaces with clear nail polish as a quick-and-dirty rust preventative.

P1010536.JPG
P1010534.JPG

This let me make simple boxes without any weird contortions to make up for the funny shape of the bike.

The boxes themselves are made from almost a whole 4'x8' sheet of 12mm marine plywood using glue-and-screw assembly with 3/4" quarter-round oak trim on the inside edges. The width of the vertical rack is 10" at it's base and 7" at the top rack. Each box is 13" wide at the base and 16" wide at the top, with the same 1.5" bottom-to-top slope on each side to match the rack on the inside and look nice and symmetric on the outside. The slopes on the front and back were chosen to be reminiscent of a Bakfiets and maintain heel clearance for the pilot. The finish is a water-based stain under a UV-absorbing spar varnish, both low-VOC.

The baby seat is a second-hand infant car seat with the carry handle cut off. It's strapped in with a high-strength NRS cargo strap with a layer of closed-cell foam (pipe insulation) between the seat and the box for suspension. The rain cover shown is the same UPPAbaby Bubble that Totcycle used for his Madsen infant seat. I'm less than impressed with the cover, as it doesn't actually act as a rain cover because the ventilation mesh on the sides isn't covered by the rain shield. Also, the rain cover is also the sun cover and therefore opaque. This bike needs to be all-conditions for Portland weather, which means great rain protection while letting Jasper look out and us look in. It'll do for now, but Katie and I are scheming a sweet ventilated rain cover for the whole box.

Also in the works is a matching top deck and dyno-powered lighting system.

Baby on a Bike!

It's coming...

Yuba with Boxes 1

It's coming...

Yuba with Boxes 2

It's here!

Yuba with Boxes 3

After seven weeks of genuinely delightful transportational walking, and less-fun bus riding, we are a bike-mobile family once again: the Yuba Mundo baby-on-a-bike project is (provisionally) complete!

I'll leave the technical details to Dave, who is mechanic and carpenter for this rig. And I can't write much, as I hear Jasper waking from his afternoon nap even now. But I couldn't wait to share.

The bike is beautiful and boat-like, and we feel it needs a proper name stenciled on the back. We have a few we've been tossing around, but nothing has stuck yet. What should we write on this bike's substantial rear-end?

Does this bike make my butt look big?

And before I go... here's the boy in his new chariot!

Baby in a Box

Thursday, January 7, 2010

Nearly There...

Dave started back at work this week, and Jasper and I have been doing a lot of walking to get from here to there. But the baby Yuba setup is so close to done: I think this weekend will do it. Stay tuned.

Until then, please enjoy these shots of Jasper in a bike onesie.

Bike Onesie.jpg

Daydreaming of Bicycles.jpg

Friday, December 18, 2009

Going Places

Jasper is three weeks old today. We are sleep-deprived and in love. While most of life revolves around our warm little house, we have had to venture out a few times. Here's what we did, and how we did it:

First, a trip to the lactation consultant, the first in what will turn out to be many trips to try to resolve some painful and ongoing nursing issues. This was .4 miles away, and we got there by slinging the baby to Dave and walking. Bonus extra trip: across the street for lunch out with my mom! A mile is about the limit of what I was capable of walking at 5 days postpartum, and the hardness of the seats at the cafe was an unpleasant surprise, but it was beautiful weather and nice to get out of the house.

That trip ended with a referral to an ENT specialist in NW Portland, about 4 miles away, the next day. We got there via the Trimet bus system with Jasper in a sling on his dad, and it took two buses and about 40 minutes each way. The way out was ok, but by the trip home the baby and I were both pretty fussy, and the buses were packed with rush-hour and Civil War game traffic (Go Ducks!). While we were able to find seats, the crowds made the bus feel grimy and germy and like a terrible place to take a newborn. In site of this, we made it home and no one contracted any terrible diseases. Maybe the sling wrapped around the baby kept flu-y water droplets off?

Then we were exhausted, and spent the next week hiding out inside, gratefully accepting food and visits from friends and neighbors while moving as little as possible.

The following weekend, two weeks postpartum, Dave's folks were in town, and we ventured out for lunch with the baby on me in a sling, on foot. It was .3 miles. The baby and I both had a nice long nap afterward.

Two days later, our neighborhood association had its annual Christmas Party, and we decided to be sociable and go. I wore the baby and we walked up, met a few folks, went on a horse-drawn caroling ride, drank hot cider, and generally Made Merry. .4 miles each way.

The following day Jasper had his two week appointment at the Birth Center. Unfortunately, the infant bucket for the Yuba remains conceptual-- so how to move the baby 1.25 miles each way with no pedicab? We took a simple, though I'm afraid questionably-legal, approach: I wore Jasper, and we rode on the back of the Yuba just like we did while I was pregnant. Traveling only at low speeds and on traffic-calmed bike boulevards this felt perfectly safe; I would certainly NOT want to ride this way without infrastructure, or indeed even on one of the busier bike lanes (say, Hawthorne or Vancouver).

The midwives referred us to a pediatric chiropractor a few blocks over to try to resolve the continuing nursing trouble. We've made that trip twice now, also with me and baby on the back of the Yuba. It's a mile and a half over there, and so far this approach is working fine. I button my coat over the top of the sling when it's raining, and Jasper falls right asleep once we get moving.

I have less feedback from the baby than I'd like when he's in the sling and we're moving, because the vibration from the bike makes it hard for me to check in with him without opening up the coat and the top of the sling, which gets him wet and (understandably) irritates him. But I think this will be true of any baby carrier we put on the Yuba as the baby will eventually be behind the rider, and so still difficult to check on. And eventually, I'll learn that I don't need to check on him every minute and a half to see if he's ok (hello, new mama paranoia!) so that will matter less.

I'm thrilled that we're three weeks into this parenting adventure and haven't yet had occasion to use the car seat. I'm not sure when we will. Maybe if we go visit my cousins in Vancouver (hi Lyn!) or my great aunt in Lake Oswego. Maybe if we need to get somewhere in a particular hurry, or in the middle of the night. But so far, I feel we're getting where we need to be, safely, and under our own power. And I feel great about that.